Yamaha D24 Owner's Manual - Page 60
Setting the Nudge Time
View all Yamaha D24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
54 Chapter 5-General Operation Setting the Nudge Time The length of the section to be auditioned is set using the Nudge Time function. 1 Press the [UTILITY] button. The UTILITY indicator lights up. 2 Use the JOG/DATA dial to select "NUDGE TIME," and then press the [ENTER] button. The currently set nudge time appears on the display. 3 Use the JOG/DATA dial to set the nudge time to 20, 50, or 100 ms. The default setting is 100 ms. 4 Press the [ENTER] button to activate your selection, or the [CANCEL] button to cancel the Nudge Time function. 5 Press the [UTILITY] button again to leave utility. The UTILITY indicator goes out. D24-Owner's Manual
54
Chapter 5
—
General Operation
D24—Owner’s Manual
Setting the Nudge Time
The length of the section to be auditioned is set using the Nudge Time function.
1
Press the [UTILITY] button.
The UTILITY indicator lights up.
2
Use the JOG/DATA dial to select
“
NUDGE TIME,
”
and then press the [ENTER]
button.
The currently set nudge time appears on the display.
3
Use the JOG/DATA dial to set the nudge time to 20, 50, or 100 ms.
The default setting is 100 ms.
4
Press the [ENTER] button to activate your selection, or the [CANCEL] button
to cancel the Nudge Time function.
5
Press the [UTILITY] button again to leave utility.
The UTILITY indicator goes out.