Yamaha D24 Owner's Manual - Page 75

70 Chapter 7-Punch In/Out Recording Manual Punch In/Out Recording This section explains how to perform manual punch in/out recording for real. With the Auto Input monitoring function turned on, playback and input monitor switching is performed automatically at the LAST REC IN and OUT points. See "Monitoring" on page 42 for more information. The following illustration shows the procedure for manual punch-in/out recording. 1-1 1 READY 2 2-1 2 3-1 3 4-1 4 5-1 5 6-1 6 7-1 7 8-1 8 2 RECORD READY PLAY LAST REC IN point LAST REC OUT point Play Record REC PLAY Play PLAY STOP 1 Use the [RECORD READY] buttons to select tracks for recording. The corresponding READY indicators flash. 2 Press the [PLAY] button to start playback. Playback starts and the PLAY button indicator lights up. 3 Press the [REC] and [PLAY] buttons simultaneously to punch in. Recording starts,"RECORDING"appears on the display, and the REC button indicator and READY indicators light up continuously. The LAST REC IN point is set automatically and its indicator lights up. 4 Press the [PLAY] button to punch out. The D24 stops recording and continues with normal playback. The REC button indicator goes out and the READY indicators flash. The LAST REC OUT point is set automatically and its indicator lights up. The transport buttons are inactive for about one second following a punch out, due to internal processing by the D24. 5 Press the [STOP] button to stop playback. The PLAY button indicator goes out. To play back what you've just recorded, press the LAST REC [IN] button to locate the point at which recording started, and then press the [PLAY] button to start playback. D24-Owner's Manual