Yamaha DG-Stomp Owner's Manual - Page 15

Using the DG-Stomp s Try Selecting Another Patch The DG-Stomp holds a total of 180 patch programs (patch) in its internal memory. The 180 patches are divided into two areas each containing 10 groups, 3 banks and 3 patches. • AREA There are two areas, the USER AREA and the PRESET AREA. When the Store operation is used, data in the USER AREA (90 patches) can be freely rewritten. You can change settings in the PRESET AREA (90 patches) data but you can not rewrite the contents to the PRESET AREA memory. When a PRESET AREA patch is selected, a dot will appear to the lower right of the hundred's digit on the display (0.11-9.33) When the dot is not lit (011-933), it indicates that a patch in the USER AREA is selected. * When the DG-Stomp is shipped from the factory, the same patch data as found in the PRESET AREA is used in the USER AREA. Refer to the [Patch List] on the separate "Patch List" sheet. • GROUP The 90 patches in each area are divided into 10 groups (0-9). • BANK Each group is divided into 3 banks (1-3). • PATCH Each bank contains 3 patches (1-3). Try selecting some of the different patches and try out some of the different sounds. To select a different patch, use one of the three methods described below. q Using the [UP]/[DOWN] buttons on the panel • Each time the [UP] button is pressed, the next greater patch number is selected. 011 → 012 → 013 → 021 → 022 → 023..033 → 111.....933 → 0.11 → 01. 2.....93. 3 → 011 (returns to the top)... Every time the [DOWN] button is pressed, the next lower patch number is selected. • Press the [UP] button continuously increases the group number by one (1). 011 → 111 → 211.....911 → 01. 1 → 11. 1 → 21. 1.....91. 1 → 011 (returns to the top)... Press the [DOWN] button continuously decreases the group number by one (1). • Press the [UP] and [DOWN] button simultaneously to switch between the USER AREA ↔ PRESET AREA. 011 ↔ 0.11 • Patch Characteristics USER AREA GROUP 1 GROUP 0 BANK 1 BANK 2 BANK 3 PATCH 1 PATCH 2 PATCH 3 PATCH 1 PATCH 2 PATCH 3 PATCH 1 PATCH 2 PATCH 3 GROUP 9 PRESET AREA GROUP 1 GROUP 0 BANK 1 BANK 2 BANK 3 PATCH 1 PATCH 2 PATCH 3 PATCH 1 PATCH 2 PATCH 3 PATCH 1 PATCH 2 PATCH 3 GROUP 9 15