Yamaha DG-Stomp Owner's Manual - Page 18
Using a Foot Pedal Controller, Using the DG-Stomp Without Patches
View all Yamaha DG-Stomp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Using the DG-Stomp q Using the DG-Stomp Without Patches The [MANUAL] button lets you control the DG-Stomp when patches are not used. Press the [MANUAL] button to enter the Manual Mode (the lamp lights). In this mode, all knobs and effect buttons are set to their present condition. In the Manual Mode, changes to any knob or button can be performed directly. q Chromatic Auto Tuner Function The Tuner Mode can be accessed while in the Play Mode by simultaneously pressing the [UTILITY] button and the [STORE] button or, holding the BANK switch until "tu" appears in the display. The Tuner Mode provides a chromatic tuner for tuning. → page 22 [Tuner Mode] To cancel the Manual Mode, simply recall a patch. Press the footswitch (1-3) that corresponds to the patch number shown on the display to return the DG-Stomp to the same condition previous to entering the Manual Mode. Also, the Manual Mode will be exited and the [MANUAL] lamp will flash if the Modulation Effect's secondary parameters are changed. q Factory Default To return the DG-Stomp to its factory-preset condition, hold the buttons [UP] and [MANUAL] and turn the Power ON ( ). The DG-Stomp will then be reset to its factory defaults and all data in the USER AREA will be rewritten with data for the patches listed in the Patch List (on the separate "Patch List" sheet). q Using a Foot Pedal (Controller) Connecting an optional foot controller (expression pedal) such as the YAMAHA FC-7, etc., to the EXP. PEDAL jack lets you control DG-Stomp's volume, tone or effect parameters (setting values) and use the device as a Wah pedal. → page 21 [External Control Settings] When the DG-Stomp is reset to its factory default condition, all data stored in memory is erased. We recommend that any important data be stored in an external MIDI device or that notes be taken of the settings. q Controlling the DG-Stomp from an External MIDI Device Using a MIDI cable to connect the MIDI IN jack on the DG-Stomp to the MIDI OUT jack on an external MIDI device lets you control DG-Stomp's volume, tone and effect parameters (setting values) and use the device as a Wah pedal. → page 21 [External Control Settings] 18