Yamaha DG-Stomp Owner's Manual - Page 17

Using the DG-Stomp s Create and Store a Patch Original settings can be stored in the USER AREA (011-933). Try creating an original patch and then store it. q Storing Procedure 1. Press the [STORE] button. When you enter the Store Mode, the display, the [STORE] lamp and the foot switch lamp corresponding to the patch number will flash. s Convenient Functions Here are some convenient functions that you can use with the DG-Stomp. q Use Foot Switches 1-3 to Switch Effects ON/OFF You can set Foot Switch 1 to act as an ON/OFF switch for the modulation effect, Foot Switch 2 as an ON/OFF switch for the delay effect, and Foot Switch 3 as an ON/OFF switch for the reverb effect. 2. Select the patch (group, bank, patch number) to which you want to store the patch. Use the same procedure as described in [Try Selecting Another Patch] (page 15) to select a patch. You can use the [UP]/[DOWN] buttons, the foot switches and the BANK switch to select the patch number. However, you cannot change the AREA (it can only be assigned to the USER AREA). Modulation Effect Delay Effect Reverb Effect 3. After select the patch you want to store your patch in, hold the [STORE] button. The store operation is complete when all lamps light. * Utility mode settings are not stored with patch data. As common settings for all patches, their contents are stored in the DG-Stomp memory. * The OUTPUT knob's setting is not stored with the patch data. Use the MASTER knob to set differences in volume for situations like backing, soloing, etc. * Data in the USER AREA (011-933) can be stored in an external MIDI device. (→ page 24) 1. Press the [UTILITY] button and set the amp select switch to the LEAD 1 position. After entering the Utility Mode, "FS. " will appear on the display and then the currently selected foot switch function will be displayed. • PrG : Select a patch • EFF : Switches the effect block ON/OFF 2. Use the [UP]/[DOWN] buttons to set the foot switch function to "EFF". This procedure can be used to store original patches and also used to rearrange the order of patches for use during live performance. 3. Press the [UTILITY] button to return to the Play Mode. 4. Press Foot Switches 1-3 to switch the corresponding effect block ON/OFF. * To change the Bank, Group or Area, press and hold the BANK switch until the display and the Foot Switch lamp flashes. (→ page 16) 17