Yamaha DSP-A1 Owner's Manual - Page 20
CONNECTING SPEAKERS, How to Connect - parts
View all Yamaha DSP-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
CONNECTING SPEAKERS Main speakers Right Use speakers with the specified impedance shown on the rear of this unit. Center speaker Rear speakers Left Right Left MAIN SPEAKERS CAUTION SEE INSTRUCTION MANUAL FOR CORRECT SETTING. A CENTER B A+ B A OR B FRONT REAR Right Left Front effect speakers COUPLER MAIN CH PRE OUT MAIN IN CENTER OUT (SURROUND) SUBWOOFER MONO SPLIT FRONT REAR (SURROUND) OUT IN Subwoofer system How to Connect: Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and - markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or speakers. Red: positive (+) Black: negative (-) 2 3 1 Unscrew the knob. Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] Tighten the knob and secure the wire. Banana Plug connections are also possible. Simply insert the Banana Plug connector into the corresponding terminal. 18