Yamaha DSP-A1 Owner's Manual - Page 50
Adjusting Output Level Of The Center, Right Rear, Left Rear, Front Effect Speakers And Subwoofer
View all Yamaha DSP-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
ADJUSTING OUTPUT LEVEL OF THE CENTER, RIGHT REAR, LEFT REAR, FRONT EFFECT SPEAKERS AND SUBWOOFER If desired, you can adjust the sound output level of the each speaker even if the output level is already set in "SPEAKER BALANCE ADJUSTMENT" on pages 29 to 31. Note: These adjustments can be made only when the effect sound is on. If none of the indicators , DSP , DIGITAL and PRO LOGIC are illuminated on the display panel, press the EFFECT button on the front panel or the EFFECT ON/OFF key on the remote control transmitter so that at least one of those indicators lights up on the display panel. CENTER (Center speaker output level) LS/RS (Left and right rear speaker output level) FRONT (Front effect speaker output level) SWFR (Subwoofer output level) Method of adjustment This adjustment can be made only by using the remote control transmitter. Note: Be sure to use the remote control transmitter with the lid open. 1 Set the PARAMETER/SET MENU switch on the remote control transmitter to the PARAMETER position. PARAMETER 4 Adjust the level on the selected speaker(s). SET MENU 2 LEVEL 3 Press once or more until the name of speaker(s) whose level you want to adjust appears on the display. LEVEL or 5 Repeat step 2 and 3 to make adjustments on other speaker(s). Whenever pressed, the selection changes as the above chart shows. * Pressing the key on the remote control transmitter changes the selection in the reverse order. 48