Yamaha DSP-A1 Owner's Manual - Page 65

1 Tape deck keys Control tape deck. (The A/B/C switch (G) should be set to the "A" position.) * DIR A, B and A/B are applicable only to double cassette tape deck. * For a single cassette deck with automatic reverse function, pressing DIR A will reverse the direction of tape running. 2 CD/LD player keys Control compact disc player or LD player. (To control compact disc player, set the A/B/C switch (G) to the "A" position. To control LD player, set the A/B/C switch (G) to the "B" position.) * DISC is applicable only to compact disc changer. * STOP is applicable only to LD player. 3 Tuner keys Control tuner. (The A/B/C switch (G) should be set to the "A" position.) +: Selects higher preset station number. -: Selects lower preset station number. A/B/C/D/E: Selects the group (A - E) of preset station numbers. 4 DSP program selector keys Select a DSP program when the built-in digital sound field processor (including the Dolby Pro Logic Surround decoder, the Dolby Digital (AC-3) decoder and the DTS decoder) is on. 5 LEVEL key When you will adjust output level of the center speaker(s), rear speakers, front effect speakers or subwoofer, first press this key once or more so that the name of speaker(s) whose level you want to adjust appears on the display. While the name is illuminated on the display, you can change the level by pressing the + or - keys (D) 6 PARAMETER/SET MENU switch Set to the PARAMETER position when you edit a parameter of a DSP program. Set to the SET MENU position when you will make an adjustment or setting change on a function in the SET MENU mode. 7 TEST key Used for speaker balance adjustment. (For details, refer to pages 29 to 31.) 8 SLEEP timer key This key is used to turn the built-in SLEEP timer on and off, and to set the SLEEP time. (For details, refer to page 61.) 9 ON SCREEN display key Changes the type of display showing the program name and parameters, or information for various setting changes and adjustments on the connected monitor's screen. Whenever pressed, the screen changes to a full display, a simple display and no display in turn. 0 SYSTEM POWER ON and STANDBY keys Pressing the SYSTEM POWER ON key turns the power to this unit on and pressing the STANDBY key turns this unit into the standby mode. A RESET button This button is inside the battery compartment. Press this button to "reset" the internal microcomputer which controls remote control operations. Microcomputer "reset" is necessary when the remote control freezes. * Pressing the RESET button will not erase learned functions. RESET button B MASTER VOLUME (up) and Turn the volume level up and down. (down) keys C MUTE key When pressed, this key mutes the volume level. To resume the original volume level, press this key again. While muting, the indicator on the VOLUME control flashes continuously. D / and -/+ keys (up) and (down) keys change parameters (or functions) in the mode selected by the PARAMETER/SET MENU switch. - and + keys make an adjustment or setting change on the parameter (or function) selected by the or key. E EFFECT ON/OFF key Switches on/off the digital sound field processor (including the Dolby Pro Logic Surround decoder, the Dolby Digital (AC-3) decoder and the DTS decoder). F A/B/C indicators The position (A, B or C) selected by the A/B/C switch is shown in red. G A/B/C switch This switch must be used only when the lid of the remote control transmitter is open. (This switch will not function when the lid is closed.) Normally, set this switch to the "A" position. When controlling a Yamaha LD player by using the CD/LD player keys (2), set this switch to the "B" position. H Input selector keys Select input source. The TAPE 2 MON key differs from other input selector keys in function. It is identical with the TAPE 2 MON/EXT. DECODER button on the front panel. Refer to page 23 for details. I TRANSMIT/LEARN indicator Lights up when the remote control transmitter is transmitting infrared signals (when a command key is pressed). J LIGHT key If this key is pressed, some of the keys on the remote control unit light up for about 5 seconds. If this key is pressed while those keys are lighting up, they stop lighting. Note When using the keys to control Yamaha components, identify them with your component's keys. If these keys are identical, their functions will be the same. For each key function, refer to the corresponding instruction in your component's manual. 63 English