Yamaha DSP-A1 Owner's Manual - Page 28
Adjustments Before Using This Unit - lfe
View all Yamaha DSP-A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
ADJUSTMENTS BEFORE USING THIS UNIT SELECTING THE OUTPUT MODES SUITABLE FOR YOUR SPEAKER SYSTEM (IN THE "SET MENU" MODE) This unit provides you with the following functions to distribute respective output signals to suitable speakers in your audio system. When speaker connections are all completed, select a proper position on each function to make the best use of your speaker system. * For details about the SET MENU mode, refer to pages 32 to 38. 1. SPEAKER SET 1A. CENTER SP 1B. REAR SP 1C. MAIN SP 1D. LFE/BASS OUT 1E. FRONT MIX 1F. MAIN LEVEL Ⅵ DESCRIPTION OF EACH FUNCTION 1A. CENTER SP Choices: LARGE (LRG)/SMALL (SML)/NONE Preset position: LRG LRG: Select this position when your center speaker is approximately the same size as the main speakers. SML: Select this position when you use a center speaker that is smaller than the main speakers. In this position, low bass signals (below 90 Hz) at the center channel are output from the SUBWOOFER terminals (or the main speakers if the MAIN position is selected on "1D. LFE/BASS OUT"). NONE: Select this position when you do not have a center speaker. The center channel sound will be output from the left and right main speakers. 1B. REAR SP Choices: LARGE/SMALL Preset position: LARGE LARGE: Select this position if your rear speakers have a high ability for bass reproduction, or a subwoofer is connected to the rear speaker in parallel. In this position, full range signals are output from the rear speakers. SMALL: Select this position if your rear speakers do not have a high ability for bass reproduction. In this position, low bass signals (below 90 Hz) at the rear channels are output from the SUBWOOFER terminals (or the main speakers if the MAIN position is selected on "1D. LFE/BASS OUT"). 26