Yamaha EMX66M Owner's Manual - Page 16

14 Front and rear panel 4 Foot switch jack (FOOT SW) A separately sold Yamaha FC5 foot switch can be connected to this jack. If a foot switch is connected to this jack, you can use your foot to switch the built-in digital effect on/off. 5 AUX IN/2TR IN-INPUT TO MAIN jacks These are input jacks that allow the signal from an external device to be added to the MAIN output. Monaural output devices such as external effects can be connected to the AUX IN jack, and stereo output devices such as cassette recorder or CD players can be connected to the 2TR IN jacks. The nominal input level and impedance are -10 dB/ 600Ω for the AUX IN jack, and -10 dBV/600Ω for the 2TR IN jacks. 6 REC OUT/MAIN/MONITOR-OUTPUT jacks These are output jacks which send line level signals from the EMX66M to external devices. A stereo recording device such as a cassette deck, DAT or MD recorder can be connected to the REC OUT jacks, and a playback device such a power amp can be connected to the MONITOR and MAIN jacks. The signals sent from each jack are as follows. • REC OUT jacks: The MAIN bus signal before it has passed through the MASTER control and graphic equalizer • MAIN jack: The MAIN bus signal which has passed through the Main MASTER control and graphic equalizer • MONITOR jack: The MONITOR bus signal which has passed through the Monitor MASTER control and graphic equalizer The nominal output level and impedance are -10 dBV/10 kΩ for the REC OUT jacks, and +4 dB/10 kΩ for the MONITOR/MAIN jacks. EMX66M-Owner's Manual