Yamaha EMX68S Owner's Manual - Page 10
Power on, STEP 2 - used
View all Yamaha EMX68S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
8 EMX88S/EMX68S Quick Guide Connecting an electric acoustic guitar or electric bass Connect an electric acoustic guitar or electric bass to the Super Hi-Z jacks. EMX88S (EMX68S) If you wish to connect multiple instruments, make a monaural connection as shown below. EMX88S (EMX68S) Electric-acoustic guitar Electric bass • If you wish to use a guitar signal processor or bass effect unit, connect them to the Hi-Z jack or LINE jack. You cannot use the Hi-Z jack and the Low-Z jack for the same channel at the same time. If a microphone has already been connected to the LowZ jack of a channel, you cannot connect the effect unit to the Hi-Z jack of the channel. Connecting an electronic musical instrument To the EMX88S/EMX68S's LINE jacks, you can connect an electronic musical instrument such as a synthesizer, drum machine, signal processor connected to an electric guitar, etc. Refer to the diagram below to make a stereo connection from the output jacks (such as L/MONO and R) of an electronic musical instrument to the LINE jacks in stereo. EMX88S (EMX68S) • You can also use the Hi-Z jacks and Super Hi-Z jacks to connect multiple instruments. You cannot use the Hi-Z jack and the Low-Z jack for the same channel at the same time. If a microphone has already been connected to the Low-Z jack of a channel, you cannot connect an instrument to the Hi-Z jack of the channel. STEP 2 Power on 1 Turn on the power to all external devices connected to the EMX88S/EMX68S. 2 Make sure that the MASTER controls in the MONITOR section and the MAIN section are set to "0," then press the POWER switch on the EMX88S/EMX68S to turn on the power. EMX88S (EMX68S) Synthesizer, Drum machine, Guitar processor EMX88S/EMX68S-Owner's Manual • Be sure to follow the power up sequence specified above to prevent the speakers from being damaged. • To correct the low range, turn on the YAMAHA SPEAKER PROCESSING switch in the upper right corner of the panel.