Yamaha EMX68S Owner's Manual - Page 13
n DIGITAL EFFECT n MAIN PROGRAM selector, PARAMETER control
View all Yamaha EMX68S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Control panel 11 s DIGITAL EFFECT section This section allows you to turn the built-in digital effect on/off and to select the effect type. 7 8 val between the last two presses will be set as the delay time. The specified time will be remembered even if the power is turned off. The LED beside the switch will blink in synchronization with the delay time only when the effect type is TAP DELAY. s MAIN section This section allows you to adjust the tone and volume of the stereo (MAIN L, R) bus, the mix level of the built-in effect, and the mix level of the external input. A F 9 0 7 PROGRAM selector This knob selects the effect type for the internal digital effect. 8 PARAMETER control This knob adjusts the parameter of the internal digital effect. * If TAP DELAY is selected by the PROGRAM selector, this adjusts the amount of feedback. 9 DIGITAL EFFECT ON switch Use this switch to turn the digital effect on and off. When this switch is on, the effect bus signal processed with the built-in digital effect is sent to the stereo (MAIN L, R) bus and MONITOR bus. The mix level of the effect sound is adjusted with the EFFECT RTN control in the MAIN and MONITOR sections. The LED beside the switch will light when the effect is on. 0 TAP switch Only if the PROGRAM selector has selected TAP DELAY as the internal effect type, you can press this switch to set the desired delay time. Press the TAP switch several times, and the inter- E B C D A Graphic equalizer The EMX88S/EMX68S has a 7-band graphic equalizer for adjusting the frequency response of the stereo (MAIN L, R) bus signal. This allows you to cut or boost each frequency band by a maximum of ±12dB. These graphic equalizer settings affect both the stereo (MAIN L, R) bus signal output to the speakers and the line level signal output from the MAIN (STEREO) jack (input/output panel 7). B EFFECT RTN control Use this control to adjust the effect signal sent to the stereo (MAIN L, R) bus from the built-in digital effect. C AUX IN control This control adjusts the amount of signal that is sent from the AUX IN jack to the stereo (MAIN L, R) bus. EMX88S/EMX68S-Owner's Manual