Yamaha EMX68S Owner's Manual - Page 20
n Connecting a monitor speaker, Bridge connection, Caution
View all Yamaha EMX68S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
18 Connections s When the power amp select switch is set to MAIN (L+R) BRIDGE: • Bridge connection Connect only one 8-16 ohm speaker to the BRIDGE jack. The speaker will output the combined signal of the MAIN L bus + R bus. A maximum output of 800 W will be obtained when an 8-ohm speaker is used. Power amp select switch Not used Not used 8Ω-16Ω Caution: When using two-channel connection or two-channel parallel connection, do not connect a speaker to the BRIDGE jack. When using a bridge connection, do not connect a speaker to either the A or B jacks. The BRIDGE jack has a protective cap that prevents a speaker from being accidentally connected to it when you are using two-channel or two-channel parallel connections. Remove this protective cap only when making a bridge connection. s Connecting a monitor speaker You can connect a powered speaker to the MONITOR jack. VOL Powered monitor EMX88S/EMX68S-Owner's Manual