Yamaha EMX68S Owner's Manual - Page 24

22 Example setups Example setups This section provides some ways in which the EMX88S/EMX68S can be used, and explains connections and operation. As a conference PA system/installed sound system This example shows the EMX88S/EMX68S used as a conference PA system or sound system. A sound mix different from that of the main speakers can be sent to the powered monitor speakers connected to the MONITOR jack. Main Speakers Set to MAIN L-R SPEAKERS B1/2 Main Speakers SPEAKERS A1/2 Powered monitor VOL Microphone CD Player Cassette Deck Connections • Connect mics to channel input jacks. • If you wish to use an external device such as a CD player or LD player, connect the outputs of the device to the 2TR IN jacks of the EMX88S/ EMX68S. Note: You can connect a stereo playback device, such as a CD player or an LD player, to channels 7-8 (EMX88S), 5-6 (EMX68S) LINE inputs. The MIC and LINE inputs of channel 7 can be used simultaneously but their levels cannot be separately adjusted. (Same for channel 8 (EMX88S), 6 (EMX68S)) • If you wish to record the audio from the mics to a cassette deck, connect the REC OUT jacks of the EMX88S/EMX68S to the input jacks of the cassette deck. • Connect the main speakers to the SPEAKERS B1 or 2 jacks and the SPEAKERS A1 or 2 jacks. • Connect the powered monitor speakers to the MONITOR jack. Playing back a CD player 1 Turn the power on in the order of peripheral devices © EMX88S/EMX68S. 2 Adjust the MASTER control of the MAIN section to the "√" position. 3 Start playback on the CD player, and use the MAIN section 2TR IN control to adjust the level so that the 0 LED of the MAIN section peak level meter does not light. EMX88S/EMX68S-Owner's Manual