Yamaha EMX68S Owner's Manual - Page 26
Using an external effect, Set the EFFECT EFFECT OUT con
View all Yamaha EMX68S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
24 Example setups • Connect mics or instruments, such as keyboards, to the channel input jacks. • Connect the main speakers to the SPEAKERS A, B 1/2 jacks and the monitor speakers. • If you will be using an external effect such as delay or reverb, connect the EMX88S/EMX68S's EFFECT OUT jack to the input jack of the external effect, and connect the output jack of the external effect to the EMX88S/EMX68S's AUX IN jack. Note: If you are using an external effect, we recommend that you turn down the EFFECT RTN controls of the MAIN and MONITOR sections. If the external effect has a stereo output, it is possible to connect its output jacks to the LINE jacks. However in this case, be sure that the EFFECT controls are turned all the way down for the channels into which the effect sound is being input. If the EFFECT controls are raised, feedback will occur, and your speakers may be damaged. Using an external effect 1 Set the EFFECT section EFFECT OUT control to the "√" position. 2 Raise the EFFECT controls for the channels to which you want the external effect to be applied. 3 Adjust the input level of the external effect so that the sound is not distorted at the input of the external effect. 4 Use the MAIN section AUX IN control to adjust the level of the sound processed by the effect. EMX88S/EMX68S-Owner's Manual