Yamaha P-525 P-525 Owners Manual - Page 113

Appendix Message List Some message display remains open. In this case, press the [EXIT] button to close message display. Message Access error Bluetooth pairing... Cannot be executed Change to Current Tempo Change to Current Voice Completed Completed Restart now Convert canceled Convert completed to USB/ USERFILES/ Convert to Audio Copy completed to USB/ USERFILES/ Copy completed to User Device busy Device removed Duplicate name Executing Factory reset executing Memory Song excluded Factory reset executing Memory Song included Incompatible device Internal hardware error Last power off invalid Checking memory Maximum no. of devices exceeded Memory full Move completed to USB/ USERFILES/ Move completed to User Meaning The operation has failed. The following causes can be considered. If the following are not responsible, the file may be damaged. • The file operation is wrong. Follow the instructions in "Handling Song Files" (page 66) or "Backup"/ "Restore" (pages 90 - 91). • The connected USB flash drive is not compatible with this instrument. For information on compatible USB flash drive, see page 75. • The protected Song on which you attempted the operation is defective. The instrument is standing by for Bluetooth pairing. Refer to the instructions on page 79. The operation has failed. The following causes can be considered. Solve the causes, and try again. • The file operation you attempted cannot be executed to Preset Songs or an Audio Song. For information on the limitation of handling Song files, see page 66. This message indicates that you are applying the current tempo to the selected Song. This message indicates that you are changing the Voice of the Song with the current Voice. This message indicates that the operation is completed. Go on to the next step. Restore is completed. The instrument is automatically turned on again. This message appears when the convert operation is canceled. This message appears when the convert operation to the "USER FILES" folder on a USB flash drive is completed. This message appears during the convert operation. This message appears when the copy operation to the "USER FILES" folder on a USB flash drive is completed. This message appears when the copy operation to the "User" on this instrument is completed. The operation, such as converting to the Audio Song or Audio Song playback/recording, has failed. This message appears when you attempt to use a USB flash drive to which recording/deleting operations are repeated. Execute the Format operation after making sure there is no important data in the USB flash drive (page 107), and try again. This message appears when the USB flash drive is removed from the instrument. This message indicates that an identically named file already exists. Rename the file (page 71). The instrument is executing the operation. Wait until the message disappears, then go on to the next step. The default settings (except the Songs in the "User" category) have been restored (page 91). This message also appears if you press and hold down the C7 key and turn on the power to the instrument. This message appears when the All Memory Clear (page 91) operation is completed. All settings of this instrument have been reset to the default settings. The Songs in the "User" category (page 45) and the Registration Memory (page 72) settings are deleted. This message appears when an incompatible USB flash drive is connected. Use a device whose compatibility has been confirmed by Yamaha (page 75). A malfunction has occurred in the instrument. Contact your nearest Yamaha dealer or authorized distributor. This message appears when the power is turned on after turning off the power while handling a Song file (page 66) or saving a backup file (page 90). The internal memory is being checked while this message appears. If the internal settings are damaged, they will be reset to the default settings. If the Songs in the "User" are damaged, they will be deleted. The number of devices exceed the limitation. Only one USB device can be connected. For details, see page 75. Since the capacity and the number of files in the "User"/USB flash drive are full, the operation cannot be completed. Delete some Songs in the "User"/USB flash drive (page 68) or move Songs to another USB flash drive (page 69), and try again. This message appears when the move operation to the "USER FILES" folder on a USB flash drive is completed. This message appears when the move operation to "User" on the instrument is completed. 113 P-525 Owner's Manual