Yamaha PSR-A3 Owner's Manual - Page 49

Registration Memory 3 Register the Settings ...While holding the [MEMORIZE] button, press one of the REGISTRATION MEMORY buttons. Any data that was previously in the selected location is erased and replaced by the new settings. The corresponding Registration Memory number will appear above "REGIST" in the display. MEMORIZE 1 ACCOMP 2 3 4 FREEZE REGISTRATION MEMORY • Please note that anytime you store to a REGISTRATION MEMORY button, all settings previously stored in that button will be erased and replaced by the new settings. q Enter a New Name for the Registration Bank If you want to enter a descriptive name for easier identification, enter your original Registration Bank name, this is recommended. Use the cursor [>] button to move the cursor to the first (left most) character of the Registration Bank name in the display. A Registration Bank name can consist of up to 8 characters. The position of the character you want to enter or change can be selected by moving the cursor. Using the [-/NO] and [+/YES] buttons or the data dial, enter the desired character listed below. The number buttons can also be used to enter the number. If you want to insert an underline character at the cursor position, press the cursor [v] button. If you want to delete a character at the cursor position, press the cursor [w] button. When you've finished entering the Registration Bank name, move the cursor to the position other than the Registration Bank name so that the newly entered Registration Bank name will be memorized. • The Registration Memory data including it's name is retained in memory even when the power switch is turned OFF, as long as the batteries are installed or the AC adaptor is connected. Character List ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz 0123456789- 101 Yamaha 48