ZyXEL B-500 User Guide - Page 146
Console Port Speed, Table 16-2 Menu 24.2.1 System Maintenance : Information
View all ZyXEL B-500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
ZyAIR B-500 Wireless Access Point User's Guide The following table describes the fields in this menu. Table 16-2 Menu 24.2.1 System Maintenance : Information FIELD DESCRIPTION Name Displays the system name of your ZyAIR. This information can be changed in Menu 1 - General Setup. Routing Refers to the routing protocol used. ZyNOS F/W Version Refers to the ZyNOS (ZyXEL Network Operating System) system firmware version. ZyNOS is a registered trademark of ZyXEL Communications Corporation. Country Code Refers to the country code of the firmware. LAN Ethernet Address Refers to the Ethernet MAC (Media Access Control) of your ZyAIR. IP Address This is the IP address of the ZyAIR in dotted decimal notation. IP Mask This shows the subnet mask of the ZyAIR. DHCP This field shows the DHCP setting of the ZyAIR. When you have completed this menu, press [ENTER] at the prompt "Press ENTER to confirm or ESC to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen. 16.3.2 Console Port Speed You can set up different port speeds for the console port through Menu 24.2.2 - System Maintenance - Console Port Speed. Your ZyAIR supports 9600 (default), 19200, 38400, 57600 and 115200 bps console port speeds. Press [SPACE BAR] and then [ENTER] to select the desired speed in menu 24.2.2, as shown in the following figure. Menu 24.2.2 - System Maintenance - Change Console Port Speed Console Port Speed: 9600 Press ENTER to Confirm or ESC to Cancel: Figure 16-5 Menu 24.2.2 System Maintenance : Change Console Port Speed After you changed the console port speed on your ZyAIR, you must also make the same change to the console port speed parameter of your communication software. 16-4 System Information and Diagnosis