ZyXEL B-500 User Guide - Page 154

ZyAIR B-500 Wireless Access Point User's Guide Menu 24.6 - Restore Configuration To transfer the firmware and the configuration file, follow the procedure below: 1. Launch the FTP client on your workstation. 2. Type "open" and the IP address of your router. Then type "root" and SMT password as requested. 3. Type "put backupfilename rom-0" where backupfilename is the name of your backup configuration file on your workstation and rom-spt is the Remote file name on the router. This restores the configuration to your router. 4. The system reboots automatically after a successful file transfer. For details on FTP commands, please consult the documentation of your FTP client program. For details on restoring using TFTP (note that you must remain in the menu to back up using TFTP), please see your router manual. Press ENTER to Exit: Figure 17-3 Menu 24.6 Restore Configuration 17.4 Uploading Firmware and Configuration Files Menu 24.7 - System Maintenance - Upload Firmware allows you to upgrade the firmware and the configuration file. WARNING! PLEASE WAIT A FEW MINUTES FOR THE ZYAIR TO RESTART AFTER FIRMWARE OR CONFIGURATION FILE UPLOAD. INTERRUPTING THE UPLOAD PROCESS MAY PERMANENTLY DAMAGE YOUR ZYAIR. Menu 24.7 - System Maintenance - Upload Firmware 1. Upload System Firmware 2. Upload System Configuration File Enter Menu Selection Number: Figure 17-4 Menu 24.7 System Maintenance : Upload Firmware The configuration data, system-related data, the error log and the trace log are all stored in the configuration file. Please be aware that uploading the configuration file replaces everything contained within. 17-6 Firmware and Configuraiton File Maintenance