ZyXEL EOC350 Series User Guide - Page 19
Overview, The System Setup Screen
View all ZyXEL EOC350 Series manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
CHAPTER 3 System Setup 3.1 Overview This chapter describes how to configure the IP and DHCP Snooping parameters of the Ethernet interface facing the Internet Service Provider (ISP). 3.2 The System Setup Screen Use this screen to configure the IP and DHCP Snooping parameters. Click System Setup to show the following screen. Figure 8 System Setup The following table describes the items in this screen. Table 7 System Setup LABEL DESCRIPTION IP Address Assignment Select Static to enable manual IP configuration or Dynamic (DHCP) to enable the EOC350TS to get its IP configuration via the Dynamic Host Configuration Protocol (DHCP). IP Address Enter the IP address you want to assign to your EOC350-TS in dotted decimal notation, for example, 192.168.1.1 (factory default). Subnet Mask Type the subnet mask of your network in dotted decimal notation, for example 255.255.255.0 (factory default). Your EOC350-TS automatically computes the subnet mask based on the IP address you enter, so do not change this field unless you are instructed to do so. Default Gateway Enter the IP address of the default gateway in dotted decimal notation, for example 192.168.1.254. EOC350 Series User's Guide 19