ZyXEL EOC350 Series User Guide - Page 68

Chapter 11 Telnet Table 50 Generic Telnet Commands (continued) COMMANDS ARGUMENTS [ ] IS OPTIONAL swtagvlan [-c ] [-p [-r ] [-v ] [-i ] [-o ]] tftp time upep -s -c -f [-a] [-m ] [-n ] [-v] upmaster upsys useradd userdel name -p -r name DESCRIPTION Display or setup the LAN1/LAN2/EoC tagged VLAN. • : configure LAN1, LAN2 or EoC port • : 802.1p value, 0~7 • : 802.1Q VID, 1~4095 • : This is an ingress rule to accept all incoming packets or accept incoming tagged packets only, reject other incoming packets. • : This is an egress rule to untag, tag or bypass the outgoing packets. • -c: enable tagged VLAN mode or not • -p: the port in tagged VLAN mode • -r: 802.1p in tagged VLAN mode • -v: VID of 802.1Q in tagged VLAN mode • -i: ingress rule for the port in tagged VLAN mode • -o: egress rule for the port in tagged VLAN mod Get a file (upload file onto termination system) or to put a file (retrieve file from termination system) from a TFTP server. • : IP address or host name • : run TFTP command 'get' or 'put' • : filename Display current system time. Upgrade the termination adapter EoC. For EoC drivers, this operation also synchronizes the termination adapter with the termination adapter EoC Properties stored in the termination system. • -a: upgrade all on-line termination adapters at once • -m: upgrade the termination adapter with matching MAC • -n: upgrade the termination adapter 'Note' property of the termination adapter with the matching MAC Upgrade the termination system EoC driver (stored in Upload Area). This operation also synchronizes the termination system EoC device with its termination system EoC Properties. Upgrade the uploaded system firmware (stored in Upload Area), then reboot. Create new management user account. • name: user name • -p: login password • -r: 'ro' means a user has read-only privileges, 'rw' means a user has read-write privileges Delete the management user account. • name: user name 68 EOC350 Series User's Guide