ZyXEL M-102 User Guide - Page 46

Infrastructure, DISABLE

Get ZyXEL M-102 PDF manuals and user guides View all ZyXEL M-102 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 46 highlights

ZyXEL M-102 User's Guide 3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPAPSK or 802.1x from the drop-down list box to enable data encryption. If you select AdHoc network type in the first screen, you can only use WEP encryption method. Otherwise, select DISABLE to allow the M-102 to communicate with the access points or other peer wireless computers without any data encryption and skip to step 6. Figure 23 Profile: Security Setting: Encryption Type 4 The screen varies depending on the encryption method you select in the previous screen. The settings must be exactly the same on the APs or other peer wireless computers as they are on the M-102. Refer to Section 3.2.2 on page 36 for detailed information on wireless security configuration. Figure 24 Profile: Security Setting 5 Specify a wireless protocol. Select 802.11b to have the M-102 connect to an IEEE 802.11b wireless device. Select 802.11g to have the M-102 connect to an IEEE 802.11g wireless device. Select both to have the M-102 connect to either an IEEE 802.11g or IEEE 802.11b wireless device. 46 Chapter 3 ZyXEL Utility Configuration

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
ZyXEL M-102 User’s Guide
46
Chapter 3 ZyXEL Utility Configuration
3
If you select
Infrastructure
network type in the first screen, select
WEP
,
WPA
,
WPA-
PSK
or
802.1x
from the drop-down list box to enable data encryption. If you select
Ad-
Hoc
network type in the first screen, you can only use
WEP
encryption method.
Otherwise, select
DISABLE
to allow the M-102 to communicate with the access points
or other peer wireless computers without any data encryption and skip to step
6
.
Figure 23
Profile: Security Setting: Encryption Type
4
The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the M-102. Refer to
Section 3.2.2 on page 36
for detailed information on
wireless security configuration.
Figure 24
Profile: Security Setting
5
Specify a wireless protocol. Select
802.11b
to have the M-102 connect to an IEEE
802.11b wireless device. Select
802.11g
to have the M-102 connect to an IEEE 802.11g
wireless device. Select both to have the M-102 connect to either an IEEE 802.11g or
IEEE 802.11b wireless device.