ZyXEL N4100 User Guide - Page 185
Table 46, Advanced > Snmp
View all ZyXEL N4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 23 SNMP The following table describes the fields in this screen. Table 46 ADVANCED > SNMP LABEL DESCRIPTION SNMP Setup Select Enable to allow a manager station to manage and monitor the N4100 through the network via SNMP. Otherwise, select Disable. Port SNMP Port Enter the N4100's port number to which the manager station sends requests. Trap Port Enter the port number on which the manager station listens for SNMP traps and information from the N4100. Configuration No This is the index number of the entry. Community Name Enter the password for the incoming Get, GetNext or Set requests from the management station. The default community for read-only access is public and the default community for read-write access is private. NMS Address Enter the IP address of the Network Management System (NMS) that controls and monitors the managed device (N4100). Privileges ANY means any computer that connects to the N4100 can request SNMP information and/or receive traps from the N4100. Select the privilege level of the password. Read means the password is for read-only (Get or GetNext) access. Write means the password is for read-write (Get/GetNext and Set) access. Trap Recipient means the password is for accepting SNMP traps from the N4100. Status Apply All means the password has all the above permissions. Select whether this password is valid or not. Click this button to save your changes back to the N4100. N4100 User's Guide 185