Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG-418N » Manual Viewer

ZyXEL NBG-418N User Guide - Page 69

What You Should Know

Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Chapter 6 Wireless LAN 6.3 What You Should Know Every wireless network must follow these basic guidelines. • Every wireless client in the same wireless network must use the same SSID. The SSID is the name of the wireless network. It stands for Service Set IDentity. • If two wireless networks overlap, they should use different channels. Like radio stations or television channels, each wireless network uses a specific channel, or frequency, to send and receive information. • Every wireless client in the same wireless network must use security compatible with the AP. Security stops unauthorized devices from using the wireless network. It can also protect the information that is sent in the wireless network. 6.3.1 Wireless Security Overview The following sections introduce different types of wireless security you can set up in the wireless network. 6.3.1.1 SSID Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change the default SSID to something that is difficult to guess. This type of security is fairly weak, however, because there are ways for unauthorized devices to get the SSID. In addition, unauthorized devices can still see the information that is sent in the wireless network. 6.3.1.2 MAC Address Filter Every wireless client has a unique identification number, called a MAC address.1 A MAC address is usually written using twelve hexadecimal characters2; for example, 00A0C5000002 or 00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate User's Guide or other documentation. You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to use the wireless network. If a wireless client is allowed to use the wireless network, it still has to have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the wireless network, it does not matter if it has the correct settings. This type of security does not protect the information that is sent in the wireless network. Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized wireless client. Then, they can use that MAC address to use the wireless network. 1. Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds of wireless devices might not have MAC addresses. 2. Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F. NBG-418N User's Guide 69

Section	Page
NBG-418N	1
Contents Overview	3
Table of Contents	5
User’s Guide	11
Introduction	13
1.1 Overview	13
1.2 Securing the NBG-418N	14
1.3 LEDs	15
1.4 The WPS Button	15
1.5 Wall Mounting	16
The Web Configurator	17
2.1 Overview	17
2.2 Accessing the Web Configurator	17
2.3 Resetting the NBG-418N	19
2.3.1 Using the RESET Button	19
Connection Wizard	21
3.1 Wizard Setup	21
3.2 Connection Wizard: STEP 1: System Information	22
3.2.1 System Name	22
3.2.2 Domain Name	23
3.3 Connection Wizard: STEP 2: Wireless LAN	23
3.3.1 WPA-PSK or WPA2-PSK Security	24
3.4 Connection Wizard: STEP 3: Internet Configuration	25
3.4.1 Ethernet Connection	26
3.4.2 PPPoE Connection	26
3.4.3 PPTP Connection	27
3.4.4 Your IP Address	28
3.4.5 WAN IP Address Assignment	29
3.4.6 IP Address and Subnet Mask	30
3.4.7 DNS Server Address Assignment	30
3.4.8 WAN IP and DNS Server Address Assignment	30
3.4.9 WAN MAC Address	31
3.5 Connection Wizard Complete	32
Modes	35
4.1 Overview	35
4.2 Setting your NBG-418N to Router Mode	36
4.2.1 Status Screen (Router Mode)	37
4.2.2 Router Mode Navigation Panel	42
4.3 Setting your NBG-418N to AP Mode	44
4.3.1 Status Screen (AP Mode)	45
4.3.2 AP Navigation Panel	47
4.4 Setting your NBG-418N to Universal Repeater Mode	48
4.4.1 Status Screen (Universal Repeater Mode)	49
4.4.2 Universal Repeater Navigation Panel	51
4.5 Setting your NBG-418N to Client Bridge Mode	52
4.5.1 Status Screen (Client Bridge Mode)	53
4.5.2 Client Bridge Navigation Panel	54
Tutorials	57
5.1 Overview	57
5.2 How to Connect to the Internet from an AP	57
5.2.1 Configure Wireless Security Using WPS on both your NBG-418N and Wireless Client	57
5.3 Enable and Configure Wireless Security without WPS on your NBG-418N	61
Technical Reference	65
Wireless LAN	67
6.1 Overview	67
6.2 What You Can Do	68
6.3 What You Should Know	69
6.3.1 Wireless Security Overview	69
6.4 General Wireless LAN Screen	70
6.4.1 No Security	72
6.4.2 WEP Encryption	73
6.4.3 WPA-PSK/WPA2-PSK	74
6.5 MAC Filter	75
6.6 Wireless LAN Advanced Screen	76
6.7 Quality of Service (QoS) Screen	78
6.8 WPS Screen	79
6.9 WPS Station Screen	80
6.10 Scheduling Screen	81
6.11 AP Select Screen	82
6.12 WLAN Info Screen	83
WAN	85
7.1 Overview	85
7.2 What You Need To Know	85
7.2.1 Configuring Your Internet Connection	85
7.3 Internet Connection	86
7.3.1 Ethernet Encapsulation	86
7.3.2 PPPoE Encapsulation	88
7.3.3 PPTP Encapsulation	90
LAN	93
8.1 Overview	93
8.2 What You Need To Know	93
8.2.1 IP Pool Setup	94
8.2.2 LAN TCP/IP	94
8.3 LAN IP Screen	94
DHCP Server	97
9.1 Overview	97
9.2 What You Can Do	97
9.3 What You Need To Know	97
9.4 General Screen	97
9.5 Advanced Screen	98
9.6 Client List Screen	100
Network Address Translation	101
10.1 Overview	101
10.2 What You Can Do	102
10.2.1 What You Need To Know	102
10.3 General NAT Screen	103
10.4 NAT Application Screen	104
10.5 Technical Reference	106
10.5.1 NAT Port Forwarding: Services and Port Numbers	106
10.5.2 NAT Port Forwarding Example	107
Dynamic DNS	109
11.1 Overview	109
11.2 Dynamic DNS Screen	109
Firewall	111
12.1 Overview	111
12.2 What You Can Do	111
12.3 What You Need To Know	112
12.3.1 About the NBG-418N Firewall	112
12.3.2 VPN Pass Through Features	112
12.4 General Firewall Screen	112
12.5 Services Screen	113
Remote Management	115
13.1 Overview	115
13.1.1 Remote Management Limitations	116
13.1.2 Remote Management and NAT	116
13.1.3 System Timeout	116
13.2 WWW Screen	116
Universal Plug-and-Play (UPnP)	119
14.1 Overview	119
14.2 What You Need to Know	119
14.3 Configuring UPnP	120
14.3.1 Using UPnP in Windows XP Example	120
14.3.2 Web Configurator Easy Access	122
System	125
15.1 Overview	125
15.2 What You Can Do	125
15.3 System General Screen	125
15.4 Time Setting Screen	126
Logs	129
16.1 Overview	129
16.2 What You Need to Know	129
16.3 View Log Screen	129
Tools	131
17.1 Overview	131
17.2 What You Can Do	131
17.3 Firmware Upload Screen	131
17.4 Configuration Screen	133
17.4.1 Backup Configuration	133
17.4.2 Restore Configuration	133
17.4.3 Back to Factory Defaults	134
17.5 Restart Screen	134
Sys OP Mode	137
18.1 Overview	137
18.2 General Screen	137
Language	139
19.1 Language Screen	139
Troubleshooting	141
20.1 Power, Hardware Connections, and LEDs	141
20.2 NBG-418N Access and Login	142
20.3 Internet Access	143
20.4 Resetting the NBG-418N to Its Factory Defaults	144
20.5 Wireless Problems	145
IP Addresses and Subnetting	147
Pop-up Windows, JavaScripts and Java Permissions	157
Setting Up Your Computer’s IP Address	167
Wireless LANs	195
Common Services	209
Legal Information	213

Match case Limit results 1 per page

Chapter 6 Wireless LAN

NBG-418N User’s Guide

6.3

What You Should Know

Every wireless network must follow these basic guidelines.

•

Every wireless client in the same wireless network must use the same SSID.

The SSID is the name of the wireless network. It stands for Service Set IDentity.

•

If two wireless networks overlap, they should use different channels.

Like radio stations or television channels, each wireless network uses a specific channel, or

frequency, to send and receive information.

•

Every wireless client in the same wireless network must use security compatible with the AP.

Security stops unauthorized devices from using the wireless network. It can also protect the

information that is sent in the wireless network.

6.3.1

Wireless Security Overview

The following sections introduce different types of wireless security you can set up in the wireless

network.

6.3.1.1

SSID

Normally, the AP acts like a beacon and regularly broadcasts the SSID in the area. You can hide the

SSID instead, in which case the AP does not broadcast the SSID. In addition, you should change

the default SSID to something that is difficult to guess.

This type of security is fairly weak, however, because there are ways for unauthorized devices to

get the SSID. In addition, unauthorized devices can still see the information that is sent in the

wireless network.

6.3.1.2

MAC Address Filter

Every wireless client has a unique identification number, called a MAC address.

A MAC address is

usually written using twelve hexadecimal characters

; for example, 00A0C5000002 or

00:A0:C5:00:00:02. To get the MAC address for each wireless client, see the appropriate User’s

Guide or other documentation.

You can use the MAC address filter to tell the AP which wireless clients are allowed or not allowed to

use the wireless network. If a wireless client is allowed to use the wireless network, it still has to

have the correct settings (SSID, channel, and security). If a wireless client is not allowed to use the

wireless network, it does not matter if it has the correct settings.

This type of security does not protect the information that is sent in the wireless network.

Furthermore, there are ways for unauthorized devices to get the MAC address of an authorized

wireless client. Then, they can use that MAC address to use the wireless network.

Some wireless devices, such as scanners, can detect wireless networks but cannot use wireless networks. These kinds

of wireless devices might not have MAC addresses.

Hexadecimal characters are 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, A, B, C, D, E, and F.