Home » ZyXEL Manuals » Bridges & Routers » ZyXEL NBG-418N » Manual Viewer

ZyXEL NBG-418N User Guide - Page 92

Table 40, Label, Description

Add to My Manuals
Save this manual to your list of manuals

Page 92 highlights

Chapter 7 WAN Table 40 Network > WAN > Internet Connection: PPTP Encapsulation (continued) LABEL Nailed-up Connection Idle Timeout PPTP Configuration Server IP Address Get automatically from ISP Use fixed IP Address My WAN IP Address My IP Subnet Mask My IP Gateway DNS Servers First DNS Server Second DNS Server DESCRIPTION Select Nailed-Up Connection if you do not want the connection to time out. This value specifies the time in minutes that elapses before the NBG-418N automatically disconnects from the PPTP server. Type the IP address of the PPTP server. Select this option If your ISP did not assign you a fixed IP address. This is the default selection. Select this option If the ISP assigned a fixed IP address. Enter your WAN IP address in this field if you selected Use Fixed IP Address. Your NBG-418N will automatically calculate the subnet mask based on the IP address that you assign. Unless you are implementing subnetting, use the subnet mask computed by the NBG-418N. Enter a Gateway IP Address (if your ISP gave you one) in this field. If you do not configure a DNS server, you must know the IP address of a computer in order to access it. Select From ISP if your ISP dynamically assigns DNS server information (and the NBG-418N's WAN IP address). The field to the right displays the (read-only) DNS server IP address that the ISP assigns. Select User-Defined if you have the IP address of a DNS server. Enter the primary and secondary DNS server's IP address in the fields to the right. WAN MAC Address The MAC address section allows users to configure the WAN port's MAC address by either using the NBG-418N's MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address. Factory default Select Factory default to use the factory assigned default MAC Address. Clone the computer's MAC address - MAC Address Select this option to clone the MAC address of the computer (displaying in the screen) from which you are configuring the NBG-418N. Once it is successfully configured, the address will be copied to the rom file. It will not change unless you change the setting or upload a different ROM file. Set WAN MAC Address Select this option and enter the MAC address you want to use. Apply Click Apply to save your changes back to the NBG-418N. Reset Click Reset to begin configuring this screen afresh. 92 NBG-418N User's Guide

Section	Page
NBG-418N	1
Contents Overview	3
Table of Contents	5
User’s Guide	11
Introduction	13
1.1 Overview	13
1.2 Securing the NBG-418N	14
1.3 LEDs	15
1.4 The WPS Button	15
1.5 Wall Mounting	16
The Web Configurator	17
2.1 Overview	17
2.2 Accessing the Web Configurator	17
2.3 Resetting the NBG-418N	19
2.3.1 Using the RESET Button	19
Connection Wizard	21
3.1 Wizard Setup	21
3.2 Connection Wizard: STEP 1: System Information	22
3.2.1 System Name	22
3.2.2 Domain Name	23
3.3 Connection Wizard: STEP 2: Wireless LAN	23
3.3.1 WPA-PSK or WPA2-PSK Security	24
3.4 Connection Wizard: STEP 3: Internet Configuration	25
3.4.1 Ethernet Connection	26
3.4.2 PPPoE Connection	26
3.4.3 PPTP Connection	27
3.4.4 Your IP Address	28
3.4.5 WAN IP Address Assignment	29
3.4.6 IP Address and Subnet Mask	30
3.4.7 DNS Server Address Assignment	30
3.4.8 WAN IP and DNS Server Address Assignment	30
3.4.9 WAN MAC Address	31
3.5 Connection Wizard Complete	32
Modes	35
4.1 Overview	35
4.2 Setting your NBG-418N to Router Mode	36
4.2.1 Status Screen (Router Mode)	37
4.2.2 Router Mode Navigation Panel	42
4.3 Setting your NBG-418N to AP Mode	44
4.3.1 Status Screen (AP Mode)	45
4.3.2 AP Navigation Panel	47
4.4 Setting your NBG-418N to Universal Repeater Mode	48
4.4.1 Status Screen (Universal Repeater Mode)	49
4.4.2 Universal Repeater Navigation Panel	51
4.5 Setting your NBG-418N to Client Bridge Mode	52
4.5.1 Status Screen (Client Bridge Mode)	53
4.5.2 Client Bridge Navigation Panel	54
Tutorials	57
5.1 Overview	57
5.2 How to Connect to the Internet from an AP	57
5.2.1 Configure Wireless Security Using WPS on both your NBG-418N and Wireless Client	57
5.3 Enable and Configure Wireless Security without WPS on your NBG-418N	61
Technical Reference	65
Wireless LAN	67
6.1 Overview	67
6.2 What You Can Do	68
6.3 What You Should Know	69
6.3.1 Wireless Security Overview	69
6.4 General Wireless LAN Screen	70
6.4.1 No Security	72
6.4.2 WEP Encryption	73
6.4.3 WPA-PSK/WPA2-PSK	74
6.5 MAC Filter	75
6.6 Wireless LAN Advanced Screen	76
6.7 Quality of Service (QoS) Screen	78
6.8 WPS Screen	79
6.9 WPS Station Screen	80
6.10 Scheduling Screen	81
6.11 AP Select Screen	82
6.12 WLAN Info Screen	83
WAN	85
7.1 Overview	85
7.2 What You Need To Know	85
7.2.1 Configuring Your Internet Connection	85
7.3 Internet Connection	86
7.3.1 Ethernet Encapsulation	86
7.3.2 PPPoE Encapsulation	88
7.3.3 PPTP Encapsulation	90
LAN	93
8.1 Overview	93
8.2 What You Need To Know	93
8.2.1 IP Pool Setup	94
8.2.2 LAN TCP/IP	94
8.3 LAN IP Screen	94
DHCP Server	97
9.1 Overview	97
9.2 What You Can Do	97
9.3 What You Need To Know	97
9.4 General Screen	97
9.5 Advanced Screen	98
9.6 Client List Screen	100
Network Address Translation	101
10.1 Overview	101
10.2 What You Can Do	102
10.2.1 What You Need To Know	102
10.3 General NAT Screen	103
10.4 NAT Application Screen	104
10.5 Technical Reference	106
10.5.1 NAT Port Forwarding: Services and Port Numbers	106
10.5.2 NAT Port Forwarding Example	107
Dynamic DNS	109
11.1 Overview	109
11.2 Dynamic DNS Screen	109
Firewall	111
12.1 Overview	111
12.2 What You Can Do	111
12.3 What You Need To Know	112
12.3.1 About the NBG-418N Firewall	112
12.3.2 VPN Pass Through Features	112
12.4 General Firewall Screen	112
12.5 Services Screen	113
Remote Management	115
13.1 Overview	115
13.1.1 Remote Management Limitations	116
13.1.2 Remote Management and NAT	116
13.1.3 System Timeout	116
13.2 WWW Screen	116
Universal Plug-and-Play (UPnP)	119
14.1 Overview	119
14.2 What You Need to Know	119
14.3 Configuring UPnP	120
14.3.1 Using UPnP in Windows XP Example	120
14.3.2 Web Configurator Easy Access	122
System	125
15.1 Overview	125
15.2 What You Can Do	125
15.3 System General Screen	125
15.4 Time Setting Screen	126
Logs	129
16.1 Overview	129
16.2 What You Need to Know	129
16.3 View Log Screen	129
Tools	131
17.1 Overview	131
17.2 What You Can Do	131
17.3 Firmware Upload Screen	131
17.4 Configuration Screen	133
17.4.1 Backup Configuration	133
17.4.2 Restore Configuration	133
17.4.3 Back to Factory Defaults	134
17.5 Restart Screen	134
Sys OP Mode	137
18.1 Overview	137
18.2 General Screen	137
Language	139
19.1 Language Screen	139
Troubleshooting	141
20.1 Power, Hardware Connections, and LEDs	141
20.2 NBG-418N Access and Login	142
20.3 Internet Access	143
20.4 Resetting the NBG-418N to Its Factory Defaults	144
20.5 Wireless Problems	145
IP Addresses and Subnetting	147
Pop-up Windows, JavaScripts and Java Permissions	157
Setting Up Your Computer’s IP Address	167
Wireless LANs	195
Common Services	209
Legal Information	213

Match case Limit results 1 per page

Chapter 7 WAN

NBG-418N User’s Guide

Nailed-up Connection

Select

Nailed-Up Connection

if you do not want the connection to time out.

Idle Timeout

This value specifies the time in minutes that elapses before the NBG-418N

automatically disconnects from the PPTP server.

PPTP Configuration

Server IP Address

Type the IP address of the PPTP server.

Get automatically

from ISP

Select this option If your ISP did not assign you a fixed IP address. This is the default

selection.

Use fixed IP Address

Select this option If the ISP assigned a fixed IP address.

My WAN IP

Address

Enter your WAN IP address in this field if you selected

Use Fixed IP Address

My IP Subnet

Mask

Your NBG-418N will automatically calculate the subnet mask based on the IP address

that you assign. Unless you are implementing subnetting, use the subnet mask

computed by the NBG-418N.

My IP Gateway

Enter a Gateway IP Address (if your ISP gave you one) in this field.

DNS Servers

First DNS Server

Second DNS Server

If you do not configure a DNS server, you must know the IP address of a computer in

order to access it.

Select

From ISP

if your ISP dynamically assigns DNS server information (and the

NBG-418N’s WAN IP address). The field to the right displays the (read-only) DNS

server IP address that the ISP assigns.

Select

User-Defined

if you have the IP address of a DNS server. Enter the primary

and secondary DNS server's IP address in the fields to the right.

WAN MAC Address

The MAC address section allows users to configure the WAN port's MAC address by

either using the NBG-418N’s MAC address, copying the MAC address from a computer

on your LAN or manually entering a MAC address.

Factory default

Select

Factory default

to use the factory assigned default MAC Address.

Clone the computer's

MAC address - MAC

Address

Select this option to clone the MAC address of the computer (displaying in the screen)

from which you are configuring the NBG-418N. Once it is successfully configured, the

address will be copied to the rom file. It will not change unless you change the setting

or upload a different ROM file.

Set WAN MAC Address

Select this option and enter the MAC address you want to use.

Apply

Click

Apply

to save your changes back to the NBG-418N.

Reset

Click

Reset

to begin configuring this screen afresh.

Table 40

Network > WAN > Internet Connection: PPTP Encapsulation (continued)

LABEL

DESCRIPTION