ZyXEL P-871-G1 User Guide - Page 4

Cpe Mode, Power, Co/cpe, Console, Ethernet

Page 4 highlights

P-871M User's Guide 5 Use the included power adaptor to connect the POWER socket to a proper power source. 6 Push the power switch to the on position. 1.2 CPE Mode CPE 1 6 CO 4 5 23 1 Set the CO/CPE switch on the rear panel to the CPE side. 2 Use the included console cable to connect the CONSOLE port to your computer's COM port for configuration. 3 Use the included yellow Ethernet cable to connect the ETHERNET port to your network device, such as a switch. 4 Over ISDN: Use the included gray cable with a RJ-45 connector to connect the DSL port to another P-871M in CO mode. Over POTS: Use the included gray cable with a RJ-11 connector to connect the DSL port to another P-871M in CO mode. 5 Use the included power adaptor to connect the POWER socket to a proper power source. 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

P-871M User’s Guide
4
5
Use the included power adaptor to connect the
POWER
socket to a proper power source.
6
Push the power switch to the on position.
1.2 CPE Mode
1
Set the
CO/CPE
switch on the rear panel to the
CPE
side.
2
Use the included console cable to connect the
CONSOLE
port to your computer’s
COM
port for configuration.
3
Use the included yellow Ethernet cable to connect the
ETHERNET
port to your network device, such as a switch.
4
Over ISDN: Use the included gray cable with a RJ-45
connector to connect the
DSL
port to another P-871M in
CO mode.
Over POTS: Use the included gray cable with a RJ-11
connector to connect the
DSL
port to another P-871M in
CO mode.
5
Use the included power adaptor to connect the
POWER
socket to a proper power source.
3
1
2
4
5
6
CO
CPE