ZyXEL P-871-G1 User Guide - Page 8

P-871M User's Guide, Command, Description

Get ZyXEL P-871-G1 PDF manuals and user guides View all ZyXEL P-871-G1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

P-871M User's Guide Command sys help exit passwd default upgrade vdsl uprate [x] vdsl downrate [y] vdsl snr [z] vdsl interleave [i] vdsl profile [1|2] vdsl reset vdsl reconnect Description Displays the system information and port settings, including the current firmware version and VDSL data rate. lt=line termination, means CO mode; nt=network termination, means CPE mode Displays all available commands. Logs you out of the CLI. Changes the system login password. Returns the P-871M to the factory defaults. Uploads the P-871M's firmware or configuration file. Displays or sets the VDSL upstream data rate. x: Enter the rate from 2000 to 100000 in Kbps. Displays or sets the VDSL downstream data rate. y: Enter the rate from 2000 to 100000 in Kbps. Displays or sets the VDSL SNR margin. z: Enter the SNR margin from 0 to 24 in dB. Displays or sets the VDSL interleave delay. i: Enter the interleave delay from 0 to 100 in 0.5 ms (milisecond). Displays or sets the VDSL profile. 1: 12a, PSD:998-M1x-B 2: 12a, PSD:997-M1x-M Resets the VDSL chipset. Forces the P-871M to re-build up the VDSL connection. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
P-871M User’s Guide
8
Command
Description
sys
Displays the system information and port
settings, including the current firmware version
and VDSL data rate.
lt=line termination, means CO mode;
nt=network termination, means CPE mode
help
Displays all available commands.
exit
Logs you out of the CLI.
passwd
Changes the system login password.
default
Returns the P-871M to the factory defaults.
upgrade
<fw|conf>
Uploads the P-871M’s firmware or
configuration file.
vdsl uprate [
x
]
Displays or sets the VDSL upstream data rate.
x
: Enter the rate from 2000 to 100000 in Kbps.
vdsl downrate
[
y
]
Displays or sets the VDSL downstream data
rate.
y
: Enter the rate from 2000 to 100000 in Kbps.
vdsl snr [
z
]
Displays or sets the VDSL SNR margin.
z
: Enter the SNR margin from 0 to 24 in dB.
vdsl interleave
[
i
]
Displays or sets the VDSL interleave delay.
i
: Enter the interleave delay from 0 to 100 in
0.5 ms (milisecond).
vdsl profile
[1|2]
Displays or sets the VDSL profile.
1
: 12a, PSD:998-M1x-B
2
: 12a, PSD:997-M1x-M
vdsl reset
Resets the VDSL chipset.
vdsl reconnect
Forces the P-871M to re-build up the VDSL
connection.