ZyXEL VMG4381 User Guide - Page 150

Chapter 8 Home Networking Table 35 Network Setting > Home Networking > Additional Subnet (continued) LABEL DESCRIPTION Offer Public IP by DHCP Select the checkbox to enable the Device to provide public IP addresses by DHCP server. Enable ARP Proxy Select the checkbox to enable the ARP (Address Resolution Protocol) proxy. Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 8.8 The STB Vendor ID Screen Set Top Box (STB) devices with dynamic IP addresses sometimes don't renew their IP addresses before the lease time expires. This could lead to IP address conflicts if the STB continues to use an IP address that gets assigned to another device. Use this screen to list the Vendor IDs of connected STBs to have the Device automatically create static DHCP entries for them when they request IP addresses. Click Network Setting > Home Networking > STB Vendor ID to open this screen. Figure 57 Network Setting > Home Networking > STB Vendor ID The following table describes the labels in this screen. Table 36 Network Setting > Home Networking > STB Vendor ID LABEL DESCRIPTION Vendor ID 1 ~ Enter the STB's vendor ID. 5 Apply Click Apply to save your changes. Cancel Click Cancel to exit this screen without saving. 8.9 The 5th Ethernet Port Screen If you are using DSL connection, you can configure your Ethernet WAN port as an extra LAN port. This fifth Ethernet port is a Gigabit port. Click Network Settings > Home Networking > 5th Ethernet Port to open this screen. VMG4381-B10A User's Guide 150