ZyXEL VMG4381 User Guide - Page 95

The 8021x Screen

Get ZyXEL VMG4381 PDF manuals and user guides View all ZyXEL VMG4381 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 95 highlights

Chapter 6 Broadband Table 13 Network Setting > Network Setting > Broadband (continued) LABEL DESCRIPTION PhyR US Enable or disable PhyR US (upstream) for upstream transmission to the WAN. PhyR US should be enabled if data being transmitted upstream is sensitive to noise. However, enabling PhyR US can decrease the US line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled. PhyR DS Enable or disable PhyR DS (downstream) for downstream transmission from the WAN. PhyR DS should be enabled if data being transmitted downstream is sensitive to noise. However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it enabled. Apply Click Apply to save your changes back to the Device. Cancel Click Cancel to return to the previous configuration. 6.5 The 8021x Screen You can view and configure the 802.1x authentication settings in the 8021x screen. Click Network Setting > Broadband > 8021x to display the following screen. Figure 28 Network Setting > Broadband > 8021x The following table describes the labels in this screen. Table 14 Network Setting > Network Setting > 8021x LABEL DESCRIPTION # This is the index number of the entry. Status This field displays whether the authentication is active or not. A yellow bulb signifies that this authentication is active. A gray bulb signifies that this authentication is not active. Interface This is the interface that uses the authentication. This displays N/A when there is no interface assigned. EAP Identity This shows the EAP identity of the authentication. This displays N/A when there is no EAP identity assigned. EAP method This shows the EAP method used in the authentication. This displays N/A when there is no EAP method assigned. Bidirectional This shows whether bidirectional authentication is allowed. Authentication Certificate This shows the certificate used for this authentication. This displays N/A when there is no certificate assigned. Trusted CA This shows the Trusted CA used for this authentication. This displays N/A when there is no Trusted CA assigned. Apply Click Apply to save your changes back to the Device. Cancel Click Cancel to return to the previous configuration. VMG4381-B10A User's Guide 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Chapter 6 Broadband
VMG4381-B10A User’s Guide
95
6.5
The 8021x Screen
You can view and configure the 802.1x authentication settings in the
8021x
screen. Click
Network
Setting > Broadband
>
8021x
to display the following screen.
Figure 28
Network Setting
>
Broadband > 8021x
The following table describes the labels in this screen.
PhyR US
Enable or disable
PhyR US
(upstream) for upstream transmission to the WAN. PhyR US
should be enabled if data being transmitted upstream is sensitive to noise. However,
enabling PhyR US can decrease the US line rate. Enabling or disabling PhyR will require the
CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and have it
enabled.
PhyR DS
Enable or disable
PhyR DS
(downstream) for downstream transmission from the WAN.
PhyR DS should be enabled if data being transmitted downstream is sensitive to noise.
However, enabling PhyR DS can decrease the DS line rate. Enabling or disabling PhyR will
require the CPE to retrain. For PhyR to function, the DSLAM must also support PhyR and
have it enabled.
Apply
Click
Apply
to save your changes back to the Device.
Cancel
Click
Cancel
to return to the previous configuration.
Table 13
Network Setting
>
Network Setting > Broadband (continued)
LABEL
DESCRIPTION
Table 14
Network Setting
>
Network Setting > 8021x
LABEL
DESCRIPTION
#
This is the index number of the entry.
Status
This field displays whether the authentication is active or not. A yellow bulb signifies that
this authentication is active. A gray bulb signifies that this authentication is not active.
Interface
This is the interface that uses the authentication. This displays
N/A
when there is no
interface assigned.
EAP Identity
This shows the EAP identity of the authentication. This displays
N/A
when there is no EAP
identity assigned.
EAP method
This shows the EAP method used in the authentication. This displays
N/A
when there is no
EAP method assigned.
Bidirectional
Authentication
This shows whether bidirectional authentication is allowed.
Certificate
This shows the certificate used for this authentication. This displays
N/A
when there is no
certificate assigned.
Trusted CA
This shows the Trusted CA used for this authentication. This displays
N/A
when there is no
Trusted CA assigned.
Apply
Click
Apply
to save your changes back to the Device.
Cancel
Click
Cancel
to return to the previous configuration.