ZyXEL VMG4381 User Guide - Page 49
and subnet mask
![]() |
View all ZyXEL VMG4381 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 4 Tutorials To configure a static route to route traffic from N1 to N2: 1 Log into the Device's Web Configurator in advanced mode. 2 Click Network Setting > Routing. 3 Click Add new static route in the Static Route screen. 4 Configure the Static Route Setup screen using the following settings: 4a Select the Active check box. Enter the Route Name as R. 4b Set IP Type to IPv4. 4c Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2. 4d Select Enable in the Use Gateway IP Address field. Type 192.168.1.253 (R's N1 address) in the Gateway IP Address field. 4e Select ADSL/atm0 as the Use Interface. 4a Click OK. Now B should be able to receive traffic from A. You may need to additionally configure B's firewall settings to allow specific traffic to pass through. VMG4381-B10A User's Guide 49
![](/manual_guide/products/zyxel-vmg4381-user-guide-12772b8/49.png)