ZyXEL VMG4381 User Guide - Page 22
The RESET Button - b10a bridge mode
View all ZyXEL VMG4381 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Chapter 1 Introducing the Device Table 1 LED Descriptions (continued) LED ETHERNET WAN COLOR Green STATUS On Blinking DESCRIPTION The Gigabit Ethernet connection is working. The Device is sending or receiving data to/from the Gigabit Ethernet link. DSL1,2 Green Orange Off On Blinking Off On There is no Gigabit Ethernet link. The ADSL line is up. The Device is initializing the ADSL line. The ADSL line is down. The VDSL line is up. Blinking The Device is initializing the VDSL line. Off INTERNET Green On The VDSL line is down. The Device has an IP connection but no traffic. Your device has a WAN IP address (either static or assigned by a DHCP server), PPP negotiation was successfully completed (if used) and the DSL connection is up. Blinking The Device is sending or receiving IP traffic. USB Off Green On There is no Internet connection or the gateway is in bridged mode. The Device recognizes a USB connection. MoCA Green Blinking Off On Blinking The Device is sending/receiving data to /from the USB device connected to it. The Device does not detect a USB connection. The Device has proper MoCA network link. The Device has LAN activity. Off The device does not have MoCA network. HPNA Green On Blinking The Device is connected to an HPNA-equipped device through the coaxial cable.A Data is transmitting over the HPNA cable. Off No HPNA device is connected. WLAN/WPS Green Green and Orange On Blinking Blinking Off The wireless network is activated. The Device is communicating with other wireless clients. The Device is setting up a WPS connection. The wireless network is not activated. A. HPNA-equipped models only. 1.6 The RESET Button If you forget your password or cannot access the web configurator, you will need to use the RESET button at the back of the device to reload the factory-default configuration file. This means that you will lose all configurations that you had previously and the password will be reset to "1234". VMG4381-B10A User's Guide 22