ZyXEL VMG4381 User Guide - Page 87

ADSL over ATM

Get ZyXEL VMG4381 PDF manuals and user guides View all ZyXEL VMG4381 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 87 highlights

Chapter 6 Broadband Table 9 Bridge Mode (ADSL/VDSL over PTM) (continued) LABEL VLAN Active 802.1p DESCRIPTION This section is available only when you select ADSL/VDSL over PTM in the Type field. Select this to add the VLAN Tag (specified below) to the outgoing traffic through this connection. IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame that contains bits to define class of service. 802.1q QoS Rate Limit Apply Cancel Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection. The greater the number, the higher the priority level. Type the VLAN ID number (from 0 to 4094) for traffic through this connection. Enter the rate limit for the connection. This is the maximum transmission rate allowed for traffic on this connection. Click Apply to save your changes. Click Cancel to exit this screen without saving. If you select ADSL over ATM as the interface type, the following screen appears. Figure 25 Bridge Mode (ADSL over ATM) The following table describes the fields in this screen. Table 10 Bridge Mode (ADSL over ATM) LABEL DESCRIPTION General Active Select this to activate the WAN configuration settings. Name Enter a service name of the connection. Type Select ADSL over ATM as the interface for which you want to configure here. The Device uses the ADSL technology for data transmission over the DSL port. VMG4381-B10A User's Guide 87

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
Chapter 6 Broadband
VMG4381-B10A User’s Guide
87
If you select
ADSL over ATM
as the interface type, the following screen appears.
Figure 25
Bridge Mode (ADSL over ATM)
The following table describes the fields in this screen.
VLAN
This section is available only when you select
ADSL/VDSL over PTM
in the
Type
field.
Active
Select this to add the VLAN Tag (specified below) to the outgoing traffic through this
connection.
802.1p
IEEE 802.1p defines up to 8 separate traffic types by inserting a tag into a MAC-layer frame
that contains bits to define class of service.
Select the IEEE 802.1p priority level (from 0 to 7) to add to traffic through this connection.
The greater the number, the higher the priority level.
802.1q
Type the VLAN ID number (from 0 to 4094) for traffic through this connection.
QoS
Rate Limit
Enter the rate limit for the connection. This is the maximum transmission rate allowed for
traffic on this connection.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to exit this screen without saving.
Table 10
Bridge Mode (ADSL over ATM)
LABEL
DESCRIPTION
General
Active
Select this to activate the WAN configuration settings.
Name
Enter a service name of the connection.
Type
Select
ADSL over ATM
as
the interface for which you want to configure here. The Device
uses the ADSL technology for data transmission over the DSL port.
Table 9
Bridge Mode (ADSL/VDSL over PTM) (continued)
LABEL
DESCRIPTION