ZyXEL XGS-4728F User Guide - Page 203
IP Protocol, Table 49
View all ZyXEL XGS-4728F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 203 highlights
Chapter 20 Classifier Table 49 Advanced Application > Classifier (continued) LABEL DESCRIPTION Layer 2 Specify the fields below to configure a layer-2 classifier. VLAN Select Any to classify traffic from any VLAN or select the second option and specify the source VLAN ID in the field provided. Priority Select Any to classify traffic from any priority level or select the second option and specify a priority level in the field provided. Ethernet Select an Ethernet type or select Other and enter the Ethernet type number in Type hexadecimal value. Refer to Table 51 on page 205 for information. Source MAC Address Select Any to apply the rule to all MAC addresses. To specify a source, select the second choice and type a MAC address in valid MAC address format (six hexadecimal character pairs). Port Type the port number to which the rule should be applied. You may choose one port only or all ports (Any). Destination MAC Address Select Any to apply the rule to all MAC addresses. To specify a destination, select the second choice and type a MAC address in valid MAC address format (six hexadecimal character pairs). Layer 3 Specify the fields below to configure a layer-3 classifier. DSCP Select Any to classify traffic from any DSCP or select the second option and specify a DSCP (DiffServ Code Point) number between 0 and 63 in the field provided. IP Select an IP protocol type or select Other and enter the protocol number in Protocol decimal value. Refer to Table 52 on page 205 for more information. You may select Establish Only for TCP protocol type. This means that the Switch will pick out the packets that are sent to establish TCP connections. Source IP Address/ Address Prefix Enter a source IP address in dotted decimal notation. Specify the address prefix by entering the number of ones in the subnet mask. Socket Number Note: You must select either UDP or TCP in the IP Protocol field before you configure the socket numbers. Select Any to apply the rule to all TCP/UDP protocol port numbers or select the second option and enter a TCP/UDP protocol port number. Destination IP Address/ Address Prefix Enter a destination IP address in dotted decimal notation. Specify the address prefix by entering the number of ones in the subnet mask. XGS-4526/4528F/4728F User's Guide 203