ZyXEL XGS-4728F User Guide - Page 274

Chapter 26 IP Source Guard 26.6 ARP Inspection Status Use this screen to look at the current list of MAC address filters that were created because the Switch identified an unauthorized ARP packet. When the Switch identifies an unauthorized ARP packet, it automatically creates a MAC address filter to block traffic from the source MAC address and source VLAN ID of the unauthorized ARP packet. To open this screen, click Advanced Application > IP Source Guard > ARP Inspection. Figure 123 ARP Inspection Status The following table describes the labels in this screen. Table 83 ARP Inspection Status LABEL DESCRIPTION Total number of filters This field displays the current number of MAC address filters that were created because the Switch identified unauthorized ARP packets. Index This field displays a sequential number for each MAC address filter. MAC Address This field displays the source MAC address in the MAC address filter. VID This field displays the source VLAN ID in the MAC address filter. Port This field displays the source port of the discarded ARP packet. Expiry (sec) This field displays how long (in seconds) the MAC address filter remains in the Switch. You can also delete the record manually (Delete). Reason This field displays the reason the ARP packet was discarded. MAC+VLAN: The MAC address and VLAN ID were not in the binding table. IP: The MAC address and VLAN ID were in the binding table, but the IP address was not valid. Delete Delete Cancel Port: The MAC address, VLAN ID, and IP address were in the binding table, but the port number was not valid. Select this and click Delete to remove the specified entry. Click this to remove the selected entries. Click this to clear the Delete check boxes above. 274 XGS-4526/4528F/4728F User's Guide