ZyXEL XGS-4728F User Guide - Page 340

Chapter 37 OSPF In the OSPF Configuration screen, click Redistribute to display the OSPF Redistribution screen. Figure 165 IP Application > OSPF Configuration > Redistribute The following table describes the labels in this screen. Table 120 IP Application > OSPF Configuration > Redistribute LABEL DESCRIPTION Redistribute Route redistribution allows your Switch to import and translate external Route routes learned through RIP routing protocol or configured manually (Static) into the OSPF network transparently. Active Select this option to activate route redistribution for routes learned through the selected protocol. Type Select 1 for routing protocols (such as RIP) whose external metrics are directly comparable to the internal OSPF cost. When selecting a path, the internal OSPF cost is added to the AB boundary router to the external metrics. Metric Value Apply Cancel Select 2 for routing protocols whose external metrics are not comparable to the OSPF cost. In this case, the external cost of the AB boundary router is used in path decision to a destination. Enter a route cost (between 0 and 16777215). The default metric value is 15. Click Apply to save your changes to the Switch's run-time memory. The Switch loses these changes if it is turned off or loses power, so use the Save link on the top navigation panel to save your changes to the nonvolatile memory when you are done configuring. Click Cancel to begin configuring this screen afresh. 340 XGS-4526/4528F/4728F User's Guide