ZyXEL XGS-4728F User Guide - Page 306
Table 102
View all ZyXEL XGS-4728F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Chapter 31 PPPoE Click the VLAN link in the Intermediate Agent > Port screen to display the screen as shown. Figure 146 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN The following table describes the labels in this screen. Table 102 Advanced Application > PPPoE > Intermediate Agent > Port > VLAN LABEL DESCRIPTION Show Port Enter a port number to show the PPPoE Intermediate Agent settings for the specified VLAN(s) on the port. Show VLAN Use this section to specify the VLANs you want to configure in the section below. Start VID Enter the lowest VLAN ID you want to configure in the section below. End VID Enter the highest VLAN ID you want to configure in the section below. Apply Click Apply to display the specified range of VLANs in the section below. Port This field displays the port number specified above. VID This field displays the VLAN ID of each VLAN in the range specified above. If you configure the * VLAN, the settings are applied to all VLANs. * Use this row to make the setting the same for all VLANs. Use this row first and then make adjustments on a VLAN-by-VLAN basis. Circuit-id Note: Changes in this row are copied to all the VLANs as soon as you make them. Enter a string of up to 63 ASCII characters that the Switch adds into the Agent Circuit ID sub-option for this VLAN on the specified port. Spaces are allowed. The Circuit ID you configure here has the highest priority. 306 XGS-4526/4528F/4728F User's Guide