eMachines E732 eMachines eME732 Series Service Guide - Page 78
Removing the CPU, See Removing the Thermal Module
View all eMachines E732 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Removing the CPU 1. See "Removing the Thermal Module" on page 68. 2. Using a slotted screw driver, rotate the CPU locking screw 180° counter-clockwise as shown. 3. Carefully lift the CPU clear of the socket. IMPORTANT:Place the CPU on a clean, dry surface when it is not installed. 68 Chapter 3
68
Chapter 3
Removing the CPU
1.
See “Removing the Thermal Module” on page 68.
2.
Using a slotted screw driver, rotate the CPU locking screw 180° counter-clockwise as shown.
3.
Carefully lift the CPU clear of the socket.
IMPORTANT:
Place the CPU on a clean, dry surface when it is not installed.