1993 Chevrolet Corvette Owner's Manual - Page 152

FF (Fast Forward): Press to advance the tape rapidly; press againto play. (The radio plays while the tapeis fast forwarding.) The indicator light will glow when this button is pressed. REV (Reverse): Press to reverse the tape rapidly; press again to play. (The radio plays whilethe tape is rewinding.) Theindicator light will glow when this button is pressed. CrO,: Press this button when playing high bias chrome or metaltapes. An indicator light will glow when this button is pressed. When playing standard tapes, press again. PROG (Program): Press to change the side of the tapebeing played. Arrows in the display will indicate the side currently playing. The tape player automatically begins playing the other side of the cassette when it reaches the end of a tape. SRCH (Search): Press to search for the next selection on the tape. There must be at least a three-second gap between selections on the tapefor this function to work. An indicator light will glow when this buttonis pressed. SCAN: Press to listen to the beginning eight seconds of each track orpassage. To stop scanning, press SCAN again; the indicator light will go out and the tape will continue to play. REPT (Repeat): Press to return to the beginning of the current selection after 10 seconds or more of play. After 10 seconds or less of play, the player will return to the beginning of the previous selection. EJCT (Eject): Press to have the cassette tape ejected (the radio will then play). This button will also work when the radio or ignition are turned Off. STOPIPLAY: Press this to listen to the radio without ejecting the cassette.