1993 Chevrolet Corvette Owner's Manual - Page 277

Service & Appearance Care ... ... Replacement Front Turn Signal Light Rear Turn Slgnal and Taillight Replacement To replace a rear turn signal and taillight on your Corvette,€0110~ these steps: 1. Use a #15 Tom* driver to remove the screws from the lens. 2. Pull the lens out. To replace a front turn signal bulbon your,Corvette,follow these steps: 1, Release the hood latch and raise the hood to the open position. 2. From the engine compartmentside, remove the front turn signal lightby rotating the bdb socket countercloclwise '14 turn and pulling it out. 3 Replace the light. . 4 To reinstall the bulb socket, match . the three loclcing tabs on the socket with the three notcheson the housing. 5. Push the bulb socketinto the housing and rotate it cloclmise...I 3 Push the bulb in and turn counter. clockwise. Remove the bulb from the socket. 4. Replace the bulb by pushing the new bulb in and turning it clockwise. 5. Replace the lens. To prevent water from getting insidethe lens, make sure the lens seal is properly positioned. Tightenthe screws. 276