2006 Chevrolet SSR Pickup Owner's Manual - Page 296

Back-Up Lamps To replace a back-up lamp bulb, do the following: 1. Reach underneath the vehicle near the license plate and find the bulb socket. 3. Turn the bulb counterclockwise and then pull outward to remove it from the socket. 4. Insert a new bulb into the socket by lining up the notches on the bulb and turn it clockwise to secure it. 5. Reverse the steps to reinstall the lamp assembly on the vehicle. Replacement Bulbs Exterior Lamp Back-Up Lamp Front Turn Signal/Parking Lamp Headlamps High-Beam Low-Beam Sidemarker Lamp Stoplamp, Taillamp and Turn Signal Lamp Bulb Number 2057 T20 9005HB3 H11 194 3157 2. Remove the socket from the lamp assembly by locating and then squeezing the release tab while turning the socket counterclockwise. For replacement bulbs not listed here, contact your dealer. 5-48