2013 Chevrolet Spark Owner Manual - Page 127

Lighting 6-3 | (Hazard Warning Flasher): Press to make the front and rear turn signal lamps flash on and off. This warns others that you are having trouble. Press the button again to turn the flashers off. When the hazard warning flashers are on, the turn signals will not work. Raise or lower the lever until the arrow starts to flash to signal a lane change. Hold it there until the lane change is completed. The lever returns to its starting position whenever it is released. If after signaling a turn or a lane change the arrow flashes rapidly or does not come on, a signal bulb may be burned out. Replace any burned out bulbs. If a bulb is not burned out, check the fuse. See Fuses and Circuit Breakers on page 10‑27. For vehicles with fog lamps, they are controlled by the # band on the middle of the turn signal lever. To use the fog lamps, the ignition must be turned on and the low-beam headlamps or parking lamps must be on. Turn the band to # to turn the fog lamps on. The band automatically returns to its starting position when released. The fog lamp indicator light comes on in the center of the instrument panel. See Front Fog Lamp Light on page 5‑20. To turn the fog lamps off, turn the band to # again. The fog lamp indicator light will go off. The fog lamps will also turn off when the high-beam headlamps are turned on. When the high-beam headlamps are turned off, the fog lamps will turn on again. Some localities have laws that require the headlamps to be on along with the fog lamps. Turn and Lane-Change Signals Fog Lamps Move the lever all the way up or down to signal a turn. An arrow on the instrument cluster flashes in the direction of the turn or lane change.