2013 Chevrolet Spark Owner Manual - Page 244

10-26 Vehicle Care To replace a license plate lamp bulb: 1. Remove the two screws (1) from the license plate lamp assembly. 2. Turn and pull the license plate lamp assembly down. 3. Turn the bulb socket (3) counterclockwise and pull it out of the lamp assembly. 4. Pull the bulb (2) straight out of the socket. 5. Push the new bulb into the socket. 6. Install the bulb socket (3) by turning clockwise into the license plate lamp assembly. 7. Replace the license plate lamp assembly by using the two screws to secure. 5. Press the new bulb in and turn clockwise to install the bulb into the socket. 6. Turn the bulb socket clockwise to reinstall. 7. Reinstall the lamp assembly and two screws. Replacement Bulbs Exterior Lamp Back-Up Lamps Front Turn Signal/ Parking Lamps High/Low-Beam Headlamp License Plate Lamp Rear Turn Signal/ Taillamps Stoplamp/ Taillamps Bulb Number 921 7444NA H13 W5W LL 7443 LL 7443 LL License Plate Lamp For replacement bulbs not listed here, contact your dealer. 1. Attachment Screws 2. License Plate Bulb 3. Bulb Socket