2013 Chevrolet Spark Owner Manual - Page 275

Vehicle Care 1. Remove the tire sealant canister (4) and compressor from its storage location. See Storing the Tire Sealant and Compressor Kit on page 10‑62. 2. Remove the air only hose (10) and the power plug (9) from the bottom of the compressor. 3. Place the compressor on the ground near the flat tire. 5. Slide the base of the tire sealant canister (3) into the slot on the top of the compressor (6) to hold it upright. Make sure the tire valve stem is positioned close to the ground so the hose will reach it. 6. Remove the valve stem cap from the flat tire by turning it counterclockwise. 4. Attach the air only hose (10) to the sealant canister inlet valve (1) by turning it clockwise until tight. 10-57 7. Attach the sealant/air hose (2) to the tire valve stem by turning it clockwise until tight. 8. Plug the power plug (9) into the accessory power outlet in the vehicle. Unplug all items from other accessory power outlets. See Power Outlets on page 5‑5.