2013 Chevrolet Spark Owner Manual - Page 243

Vehicle Care Front Turn Signal/Parking Lamps To replace a front turn signal bulb: 1. Open the hood. See Hood on page 10‑4. 4. Install the new bulb into the socket by pressing it in. 5. Install the socket into the lamp housing by turning it clockwise. 10-25 To replace a taillamp, turn signal lamp, stoplamp, or back-up bulb: 1. Open the liftgate. See Liftgate on page 2‑7. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps 2. Turn the bulb socket counterclockwise and pull it out of the lamp housing. 3. Pull the bulb straight out of the bulb socket. 1. Stoplamp/Taillamp 2. Turn Signal Lamp 3. Back-up Lamp 2. Remove the two screws and the lamp assembly. 3. Turn the bulb socket counterclockwise and remove the socket. 4. Press the bulb in and turn counterclockwise to remove it from the socket.