2013 Chevrolet Tahoe Owner Manual - Page 177

Instruments and Controls . 5-55 A switch in the down position could be labeled as Down, −, or Off. A switch in the middle position could be labeled as Middle, 0, or Neutral. to right, into the Universal Home Remote, when completing Step 4. 3. From inside your vehicle, first firmly press all three buttons at the same time for about three seconds. Release the buttons to put the Universal Home Remote into programming mode. . Example of Eight Dip Switches with Two Positions 2. Write down the 8 to 12 switch settings from left to right as follows: . When a switch is in the up position, write "Left." When a switch is in the down position, write "Right." If a switch is set between the up and down position, write "Middle." The switch settings written down in Step 2 now become the button strokes to be entered into the Universal Home Remote in Step 4. Be sure to enter the switch settings written down in Step 2, in order from left . Example of Eight Dip Switches with Three Positions The panel of switches might not appear exactly as they do in the examples above, but they should be similar. The switch positions on the hand-held transmitter could be labeled as follows: . . A. Left Button (Up, +, or On) B. Middle Button (Middle, 0, or Neutral) A switch in the up position could be labeled as Up, +, or On.