2013 Chevrolet Tahoe Owner Manual - Page 69

Seats and Restraints Returning the Seat to the Sitting Position To return the seat to the sitting position from the tumbled position: 1. Pull the seat down until it latches to the floor. The seatback cannot be raised if the seat is not latched to the floor. 3-13 3. For the 60/40 split-bench seat, make sure the safety belt in the center seating position is not caught between the two seats and is not twisted. Third Row Seats If the vehicle has a third row seat, the seatback can be folded, and the entire seat can be tumbled or removed from the vehicle. { WARNING Driver Side Rear Panel Button Shown 2. Press the automatic seat release button on the panel behind the rear doors. The seatback automatically folds flat and the seat tumbles forward. There will be a slight delay between the folding of the seatback and the tumbling of the seat. If either seatback is not locked, it could move forward in a sudden stop or crash. That could cause injury to the person sitting there. Always push and pull on the seatbacks to be sure they are locked. 2. Lift the seatback and push it rearward. Push and pull on the seatback to make sure it is locked. Folding the Seatback To fold the seatback: 1. Open the liftgate to access the controls for the seat. 2. Remove all items on the seat cushion. Notice: Folding a rear seat with the safety belts still fastened may cause damage to the seat or the safety belts. Always unbuckle the safety belts and return them to their normal stowed position before folding a rear seat.