2013 Chevrolet Tahoe Owner Manual - Page 372

10-32 Vehicle Care 5. Reverse Steps 1-3 to reinstall the license plate lamp. License Plate Lamp Electrical System Electrical System Overload The vehicle has fuses and circuit breakers to protect against an electrical system overload. When the current electrical load is too heavy, the circuit breaker opens and closes, protecting the circuit until the current load returns to normal or the problem is fixed. This greatly reduces the chance of circuit overload and fire caused by electrical problems. Fuses and circuit breakers protect power devices in the vehicle. Replace a bad fuse with a new one of the identical size and rating. If there is a problem on the road and a fuse needs to be replaced, the same amperage fuse can be borrowed. Choose some feature of the vehicle that is not needed to use and replace it as soon as possible. Replacement Bulbs If the vehicle is a hybrid, see the hybrid supplement for more information. Bulb Exterior Lamp Number Back-up Lamp License Plate Lamp 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp assembly forward through the molding opening. 3. Remove the bulb socket from the lamp assembly by turning it counterclockwise. 4. Pull the bulb straight out of the socket and install the new bulb. Rear Turn Signal Lamp, Taillamp, and Stoplamp Side Marker Lamp 7441 W5WLL 3057 KX RD 194 For replacement bulbs not listed here, contact your dealer.