2013 Chevrolet Tahoe Owner Manual - Page 395
2013 Chevrolet Tahoe Manual
Page 395 highlights
Vehicle Care inflation pressure, and check for damaged tires or wheels. If the unusual wear continues after the rotation, check the wheel alignment. See When It Is Time for New Tires on page 10‑56 and Wheel Replacement on page 10‑60. Adjust the front and rear tires to the recommended inflation pressure on the Tire and Loading Information label after the tires have been rotated. See Tire Pressure on page 10‑49 and Vehicle Load Limits on page 9‑15. Reset the Tire Pressure Monitor System. See Tire Pressure Monitor Operation on page 10‑51. Check that all wheel nuts are properly tightened. See "Wheel Nut Torque" under Capacities and Specifications on page 12‑2. 10-55 WARNING (Continued) off and cause an accident. When changing a wheel, remove any rust or dirt from places where the wheel attaches to the vehicle. In an emergency, a cloth or a paper towel can be used; however, use a scraper or wire brush later to remove all rust or dirt. { WARNING Use this rotation pattern when rotating the tires. Do not include the spare tire in the tire rotation. Rust or dirt on a wheel, or on the parts to which it is fastened, can make wheel nuts become loose after time. The wheel could come (Continued) Lightly coat the center of the wheel hub with wheel bearing grease after a wheel change or tire rotation to prevent corrosion or rust build-up. Do not get grease on the flat wheel mounting surface or on the wheel nuts or bolts.