2013 Chevrolet Tahoe Owner Manual - Page 371

Vehicle Care 10-31 Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps If the vehicle is a hybrid, see the hybrid supplement for the bulb changing procedure. To replace one of these bulbs: 1. Open the liftgate. See Liftgate on page 2‑9. 5. Pull the old bulb straight out from the bulb socket. 6. Press a new bulb into the bulb socket and install the socket into the taillamp assembly by turning it clockwise. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If this is not done, the taillamp assembly will not be able to be installed correctly. 2. Remove the two screws from the taillamp assembly. A. Stoplamp/Taillamp B. Back-up Lamp C. Taillamp/Turn Signal Lamp D. Side Marker Lamp 3. Pull the taillamp assembly rearward disengaging the two outer pins on the taillamp assembly from the vehicle. 4. Turn the bulb socket counterclockwise to remove it from the taillamp assembly.