2015 Chrysler Town & Country Owner Manual - Page 114

112 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE rear-facing child restraints will also be equipped with a Always follow the directions of the child restraint manutether strap. The tether strap will have a hook at the end facturer when installing your child restraint. Not all child to attach to the top tether anchorage and a way to tighten restraint systems will be installed as described here. the strap after it is attached to the anchorage. To Install A LATCH-Compatible Child Restraint Center Seat LATCH If the selected seating position has a Switchable AutoIf a child restraint installed in the center position blocks the seat belt webbing or buckle for the outboard position, do not use that outboard position. If a child seat in the center position blocks the outboard LATCH anchors or seat belt, do not install a child seat in that outboard position. matic Locking Retractor (ALR) seat belt, stow the seat belt, following the instructions below. See the section "Installing Child Restraints Using the Vehicle Seat Belt" to check what type of seat belt each seating position has. 1. Loosen the adjusters on the lower straps and on the tether strap of the child seat so that you can more easily attach the hooks or connectors to the vehicle anchorages. 2. Place the child seat between the lower anchorages for that seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit. If the rear seat can be moved WARNING! Never use the same lower anchorage to attach more than one child restraint. Please refer to "Installing The LATCH-Compatible Child Restraint System" for typical installation instructions.